Spinshot Player Alarm Codes

There is a long beep when error is detected, and the alarm name will be flashed on the LCD screen.

Press START or PLAY to continue even though there are alarms (except Alarm 4, Alarm 5). The alarm will remain if the faulty still exists.

Alarm 4 and Alarm 5 will stop the machine and will not respond to any commands from control panel or Drill maker app. This means the issue needs to be fixed before continue.

Alarm 8 and Alarm 9 will not stop the machine. User needs to judge if the problem really exists.

Alarm Code	Alarm Description	Please Check
Alarm 1	Top service wheel motor failed.	Check if the top wheel is spinning freely. Check if the Motor T button on the control panel has popped out. A ball may have jammed the top service wheel. Clear any balls that have dropped inside the machine.
Alarm 2	Bottom service wheel motor failed.	Check if the bottom wheel is spinning freely. Check if the Motor B button on the control panel has popped out. A ball may have jammed the bottom service wheel. Clear any balls that have dropped inside the machine.
Alarm 3	Both top and bottom service wheel motors have failed.	Check cables that connect motors to control panel. Check if the bottom wheel is spinning freely. Check if the Motor B button on the control panel has popped out. A ball may have jammed the bottom service wheel. Clear any balls that have dropped inside the machine.
Alarm 4	Horizontal motor failed.	Check sensor, cable or motor. Machine will not start until this issue is fixed.
Alarm 5	Height motor failed	New machines - check transport strap has been removed. Check sensor, cable or motor Machine will not start until this issue is fixed.
Alarm 6	Feeder motor current measured zero. Feeder driver failed, or sampling resistor open, or feeder motor failed.
Alarm 7	Feed sensor outputs always 0 or 1 ---- no transit.Maybe sensor failure, or sensor cable loose, or board part damage.
Alarm 8	HORZ step motor driver alert indicating either over temperature or over current
Alarm 9	HGHT step motor driver alert indicating either over temperature or over current
Alarm 10	WIFI module not ready.
Ball Jam	One of the service motors has ball jam	Clear all balls from inside the machine